DLG Spacer
The DLG Spacer is used in cases where the covering elements, such as ceramic tiles or cement slabs, are being installed.
It is placed at the intersection of the covering elements to create spacing and alignment between them.
The removable fins of the spacer have a standard thickness of 4 mm, but there are also options available with thickness of 2 mm and 3 mm.
The height of the spacer is 12 mm, and its thickness is 1,5 mm.
| Código | Type | Dimensions | Pcs (Per Box) |
|---|---|---|---|
| E004002002 | DLG Spacer for ceramic slabs on safety grid 2 mm tabs | Sp. 1.5 mm Ø 120 mm | 100 |
| E004002003 | DLG Spacer for ceramic slabs on safety grid 3 mm tabs | Sp. 1.5 mm Ø 120 mm | 100 |
| E004002004 | DLG Spacer for ceramic slabs on safety grid 4 mm tabs | Sp. 1.5 mm Ø 120 mm | 100 |
Productos relacionados
"T" separator profile
Sand
Synthetic turf
Concrete base
Llave ajustable para el soporte ajustable para pavimento...
Screwdriver accessory
Clip superior de borde vertical para suelo sobreelevado
-477590973f9fbc11af5ce78f4db44b2f.jpg "Schermata_2021-09-28_alle_11.22.32_(2).jpg")
Vertical angular lining clip
Clip universal para espesor de piso elevado
Polypropylene perimeter spacer
SCUDO - SEPARATING LAYER
SUPPLEMENTARY RUBBER BASE
Slab edge profile
Vertical perimeter profile
GRF grid
Joint 90° Angle
Linear joint